Home News Launch

100M+ pcs !!!P2P Compatible chips shipped

With the popularization of Chinese universities and graduate education, our technological strength has also made significant progress.30 years ago, almost every chip we had was imported;20 years ago, ...

With the popularization of Chinese universities and graduate education, our technological strength has also made significant progress.

30 years ago, almost every chip we had was imported;

20 years ago, a very small number of domestically produced chips began;

10 years ago, domestically produced chips gradually became the core component of most electronic products

Today, from DSP, MCU, FPGA, IGBT, and more, we have a large number of domestically produced devices with quality comparable to well-known Western brands.

Our MCU is completely benchmark against ST Micro in terms of performance, and we also offer an additional 2K CPLD logic unit as a gift to the customer;

Our FPGA is benchmark against Intel/Altera in terms of performance, and hardware can be completely replaced with Pin to Pin;

Our DSP, with performance benchmarking against Ti, has a higher main frequency and fully compatible hardware with Pin to Pin;

Our IGBT performs better than Infineon in some aspects;

Please refer to the following mapping table, hoping it will be helpful for your design and procurement:

We have parts for Altera, ST, Infineon, Microchip,Ti, Renesas, NCP, ADI, and so on, kindly pls find the following for some key products.

l.
The following material numbers are fully Pin2Pin compatible with Altera in hardware:
EPM240T100CxN--->AG256SLd100(CPLD)
EPM240T100IxN---->AG256SL100(CPLD)
EPM570T100CxN--->AG576SL100(CPLD)
EPM570T100IxN---->AG576SL100(CPLD)
EPM570T144CxN--->AG576SL144(CPLD)
EPM570T144IxN---->AG576SL144(CPLD)
EP3C5E144--->AG6KL144
EP4CE6E22--->AG6KL144
EP3C5F256--->AG6KF256
EP4CE6F17--->AG6KF256
EP3C10E144--->AG10KL144
EP4CE10E22--->AG10KL144
EP3C10F256--->AG10KF256
EP4CE10F17--->AG10KF256
EP3C16F256--->AG16KF256
EP4CE15F17--->AG16KF256
(Independent part numbers can be designed using the Altera Quartus environment)
ll.
MCU mapping table with ST Micro;
There are also two parts in one SoC devices with MCU and CPLD, which are fully compatible with the STM32 series in hardware. The core functions are as follows:

1.Built in 2K CPLD, it is fully Pin to Pin compatible with ST when used as a pure MCU;

2.When used with pure CPLD, it has 2K logical unit;

3.High cost-effectiveness,just as 2K CPLD logic units sponsored if fully used;

4.Industrial grade temperature range;

5.Up to 300M+ Frequency for some device

6.Peripherals are not related to packaging, even for 48Pin or 32Pin, the required peripherals can be configured through CPLD.

lll.

IGBT products, We have Discrete、PM and  IGBT , which are widely used in Home appliances、 White goods、Industrial control、 EV and Solar Inverters.  Our products now up to 3300V/1500A.

lV.
Faulhaber and Maxon Motor
From high power DC motors that can continuously generate 220mNM torque, to small
Share
Designing in China, P2P Seamless Replacement
Updating...